Description
MUTE STAND-BY FUNCTION. The pin 5 (MUTE/STAND-BY) controls the amplifier status by two different thresholds, referred to +VS. When Vpin5 higher than = +VS -2.5V the amplifier is in Stand-by mode and the final stage generators are off. When Vpin5 between +VS -2.5V and +VS -6V the final stage current 1 300 W at 10% THD+N Into 4- PBTL (1). PVDD. The TAS5162 does not require power-up. >110 dB SNR (A-Weighted, TAS5518 sequencing due to internal power-on reset. The. Modulator) efficiency of this digital amplifier is greater than 90%. <0.09% THD+N at 1 W into 6 , which enables the use of smaller power. Jan 9, 2012 1. 1. Red. Solid. 2. Anlr.THD+N Ratio. Left. Vcc=36V_1kHz_4 ohm; Ch L. 1. 2. Blue. Solid. 2. Anlr.THD+N Ratio. Left. Vcc=36V_1kHz_4 ohm; Ch R. 2. 1. Green. Solid. 2. Anlr.THD+N Ratio. Left. Vcc=36V_1kHz_4 ohm; Ch R - AW Filter. 2. 2. Black. Solid. 2. Anlr.THD+N Ratio. Left. Vcc=36V_1kHz_4 ohm; Ch
Part Number | STK4162 |
Brand | STMicroelectronics |
Image |
STK4162
STMicroel
8000
0.08
Xinye International Technology Limited
STK4162
STMICROELECT
5000
1.4025
Redstar Electronic Limited
STK4162
ST/MICRON
9501
2.725
ATLANTIC TECHNOLOGY LIMITED
STK4162
ST
31050
4.0475
OCEANIA INTERNATIONAL INDUSTRIAL LIMITED
STK4162II
STMicroelectronics
2593
5.37
Belt (HK) Electronics Co